Chosen Solution
I have an Insignia Flex with a bad digitizer. It’s the Windows 10 model, and no one lists the digitizer. I took it apart and I’m trying to match the ribbon cable, but so far no luck. Is there a relatively easy way to match a ribbon cable based on its configuration? Pic below. https://imgur.com/ihErTBg
Hi Is there any information printed on the digitizer flex cable at all? If so search online using the information By your description the tablet is an Insignia Flex 10.1 model #NS14-T004. I couldn’t find any parts or even a donor tablet online. The cable wiring may depend on the systemboard wiring and without the schematics for the board and the digitizer it would be difficult to know if a similar cable (digitizer) would be compatible. Here’s the Ifixit Insignia Flex 10.1 Repair guide, for you to compare to yours to see if I have at least got the model number correct. Update (05/29/2021) @Steve Close OK, It may be an Insignia Flex 8 model # NS-P08W7100 (supplier example only) as this has Win 10 installed. Just wondering if you can try connecting a USB keyboard to the tablet and use it to navigate through the device? If it works then press the Win key + r key (both together)and type “msinfo32” (without the inverted commas) in the box and press Enter. The device model information should be shown in the window that opens to verify the make and model etc. The digitizer I linked above was found by searching for (insert make and model number of tablet) digitizer.
