Chosen Solution
A week ago I replaced my HD with an SSD and everything was working great. At the time I had purchased some double sided tape but it seemed too thick so I didn’t use it and just taped the screen on the corners until the new tape arrived. I removed the screen following a video from here as a guide and carefully removed and replaced the adhesive. When it was all sealed up I got nothing. No sound, no chime, fan or anything else. I proceeded to go through the task of taking the screen off to see if I stupidly didn’t connect to two cables from the screen but they were there. Upon reading about the diagnostics lights I see that I am getting LED 1 which indicates there is power to the board but that’s as far as it goes. Please Help!
No. All LED #1 means is that you are getting trickle power to the power supply. It does not mean that it is giving power to anything else. So that’s your starting point.
