Chosen Solution
The other day, we had a power outage followed by a surge once the power was restored. I noticed that after this incident, my Bose 3-2-1 would not turn on. Upon opening the sub-woofer unit, I found that a fuse that was hardwired to the circuit panel inside was completely shattered. As a makeshift measure to allow the device to operate, I put a piece of tin foil in place of the fuse. I would like however to get the right fuse for the device as well as to be able to install it. I think it would be best to replace the internal design with an actual fuse holder so that future replacements won’t require me to cut and (potentially) need to re-solder the fuse back in. I need to know however what AMP rating and side of a fuse that I should put into the Bose as well.
Anthony Munoz, according to the service manual you will need the following (depending on location): 2.5A, 250V, .60 x .19, SLO-BLO (US, JAPAN, DUAL) 1.25A, 250V, 5X20 MM, SLO-BLO (EURO, UK, AUS)
