Chosen Solution
Hello My ipad had b broken digitizer so i bought a new one and wanted to repair it myself. Unfortunately i damaged one of the digitizer connectors on the mainboard. I ordered one connector and now i am trying to bring it on the board. I have successfully taken down the old broken connector, but i got problems attaching the new one. After taking it down, i see 2 lines which connects the connector to the mainboard. The top line looks different than the one on the bottom. On the bottom i can see pins ranging over. But on top there is no pins. Do i have to remove the pins on the bottom so both are on the same level or does both lines look different? I can also show you a picture if you cant understand what i mean
I dont mean to be rude but if you damaged the connector during a repair you have little chance of attaching a new one which needs to be soldered back on and requires some serious micro soldering skill. Take it to a local PCD specialist along with the new connector. The only exception to this is if the top latch has come off, you can fit a new latch by inserting it at the open position and fix it by closing it, now it should be fixed in and can open / close normally.
