Chosen Solution
I replaced my broken iPad Air 2 LCD Screen and Digitizer with a new one. But when I tried to turn on the device, after the repair, it will not start. I used an iOpener (heated it in microwave for 30 seconds) and a plastic spudger, and followed the teardown video. I’m not sure where I screwed up. Any help would be great. Thanks.
Did you try unplugging the battery and performing a hard shut down? You can do it by holding power and home button for about 10-15 seconds.
I’ve found out my problem. I tore up the small rectangular piece (on the left side of home button) that is soldered on.
