Chosen Solution
Just got new drone. It won’t connect to the remote sometimes at all and I am unsure why. If the drone does connect to the remote it will not take off and then propellers will continue to spin even if I reduce the throttle to nothing. It will then disconnect itself from the remote.
HI, try to calibrate it. First connect drone to remote. Turn on both devices; move throtle stick up and down fast, including rigth stick - moving it 360 - . There you have the connection ready, now move both stick right-down or southeast at the same time. There you have, drone connected and calibrated.
Hi guys i can help you to pairing a drone,First open a drone and open a remote control and connect to a drone and start do a calibrate a accelerator joystick and steering joystick to the left bottom corner.then release all the button till the flash of the drone indicator light turns into constant light and the calibrate complete Sorry the is for drone H36 only. If that can pairing to your drone i just say good luck for take off the drone
depress the lock button on transmitter BEFORE turning EITHER on then turn on trans while holding the button then turn on the drone They will both beep then you are bound and perform compass calibration..
Well, it’s a $60 QuadRotor which is a red flag to me. Have you tried removing the battery from both devices for 10 minutes, then plugging back in and attempting a resync of the devices? Are you certain you’ve not damaged the remote or QuadRotor itself with water or impact damage?
