Chosen Solution I have an Galaxy A51 5G (A516U) the phone was dropped and it broke the OLED screen. I replaced the screen with a refurbished OEM screen. Upon testing the phone I realized that the bottom loud speaker does not work. The earpiece works fine. I tried reboots, software updates, safemode, etc. Even did a factory reset. I ordered a replacement loudspeaker and it still did not work. Is this a software bug?...
Chosen Solution My JBL Pulse docent connect to the JBL music app on iOS the pluse icon doest show up on android the pause wont connect though it is connected to bluetooth Hi! I have exact the same problem with IOS 6.3.5 Iphone 6s and iPad mini with Android i can connect, so its a JBL SW bug I had the same problem did you tried to reinstall the app?
Chosen Solution All it does is spin when trying to start it Spins as in no compression…. Probably bent valves due to jumped timing chain or failed belt drive depending on type of drive your valve train uses (I have no way of knowing what model or age of Honda product you are referring to). My crystal ball is in the shop too, go figure.
Chosen Solution i have a iphone 4 model number A1387 white phone i turn it on and swipe right and it tells me to put in my code . i cant remember my code so it goes to emergency calls only then if i try it more than 3 times it says wait 40 mins. what should i do Update (11/13/2018) what should i do You should be able to put in in dfu mode and restore it in itunes....
Chosen Solution I dropped my Ozari scale. It does not turn on. Can it be fixed? Hi @cpolver , It may be able to be fixed but it will need to be opened and inspected first to check what damage (if obvious) has occurred. If there is no obvious damage to the internal components then it will need to be tested to find out what is wrong. Here’s the iFixit Ozeri Pronto ZK14-S Repair guides that should help, at least to gain access to see what is wrong....
Chosen Solution i forgot my pattern, what can i do? Clara Cherisson , Follow directions from the either link below to get your tablet pattern lock off, if either is not your model you may have to search(make,model, factory reset). Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://visihow.com/How_to_unlock_my_irul… http://www.hardreset.info/devices/irulu/…
Chosen Solution I’m trying to blank out all of the program start times but one. How the !&&* do you do it. The manual is a joke. Hi, If you have a Rainbird ESP-6TM, then to eliminate a start time, select a watering start time and then press the Up or Down arrow until the blank setting between 11:45 PM and 12:15 AM appears. Make sure the program you want appears in the display....
Chosen Solution I did this before with the help of a rca Ted. Starting off by pressing the power bottom and +volume bottom. I can’t remember the rest. Please help! http://www.ebay.com/gds/How-to-Reset-an-… There is a link on how to Factory Reset your tablet. If I answered your question, please hit the accept answer button! That is correct. Hold volume down+power similtaniously until the bootloader shows up. Use the volume buttons to scroll to the “factory” option....
Chosen Solution Hi! So basically around 10:00 AM this morning, I was drinking some milk and spilled a small amount after I had finished drinking it on the left side of my keyboard. I quickly tilted the keyboard towards me so a good majority of it flowed out, then started aggressively drying it with paper towels. These keys affected are Q, A, Z, left cmd, left option, ctrl, fn, and left shift....
Chosen Solution i have one question. my acer aspire v5 model no zrk i use for 3 years but now there is some problems the power is star up but there is no on the screen and over heat thanks yes of course and am work in ict department
Chosen Solution Hi, I recently bought an iFlash solo adapter for my iPod, and when I originally bought it, it worked fine. I’m using a SanDisk 64GB SD card. I have been having problems with it though since my last iPod died, I have had it in both a 6th gen as well as a 5th gen. but now no matter what I plug it into I will either get the red X or the sad iPod....
Chosen Solution Hi All, iMac runs Ok in safe mode but hangs up in normal mode, spinning wheel after a very few minutes of operation. No keyboard combinations will shut it off. Hard shutdown with power button on back. OS X El Capitan version 10.11.6, upgraded to 8GB Memory a couple months ago, June 2018 I think, also had a video card failure about the same time OS X El Capitan10....
Chosen Solution Hi Have an ipad 2, repaired the front digitizer but every time I put the front half of the screen down it loses all reception, it works fine when the top half of the screen is not down… I presume something is shorting out or the antenna is not correctly connecting to the case or something? I’m going off memory here, so please forgive me if I’m not spot on....
Chosen Solution i think i messed up the camera and earpiece and proximity sensor on my phone can i use the one from my iPhone 5c as replacement? Negative. Its a cheap part and very easy to replace: iPhone 6 Front Camera and Sensor Cable iPhone 6 Front-Facing Camera and Sensor Cable Replacement
Chosen Solution Hey, i helped replace an iPhone 7 battery, I was very careful in opening the phone and did not put the screen flat on the table as I know it is very fragile. I have tried reconnecting the battery and all the connectors from the screen. I also tried a hard reset and waited for 30 minutes as someone suggested. if I get a separate OEM screen (yes I know the cable is attached to the screen, but I have several and I might try to remove it and replace it....
Chosen Solution Hi guys, I have an iPhone 8 here. Problem: the phone keeps restarting. I opened the phone, there is no sign of water damage. Here are what I tried so far: Put a known good battery, same result.Restored the phone to original factory settings, same result.Tried a new screen, same result. Then I connected the screen without the home button, the restarting stopped, and the phone works normally. I inspected the home button flex, no sign of cut or damage....
Chosen Solution I bought an iPhone se from someone online because it didn’t turn on. I was guessing it might just be a bad battery or something. When I got it I found out it was bent. I plugged it in to the computer and it wasn’t recognized. Nothing shows up on the screen when you hold down the home and power while plugged in. I’m not sure how to test for a bad battery but I’m not sure if that’s the problem I’m thinking it might be something with the bend....
Chosen Solution My Ipod won’t turn on when pushing any buttons. I plug the Ipod into power and it turns on. I unplug the Ipod and it stays on and I can work it fine. The hold switch is not on. All buttons work fine. But when I press the play button to put the Ipod to sleep it won’t wake up again by pressing any buttons or turning the hold switch on or off....
Chosen Solution My ipod will not turn on and is not recognized by my pc or itunes. I have tried charging the battery and resetting the ipod as describe through apple’s website. It just does nothing not even light up. Battery life was always exceptional. Ideas? Mike, the first thing that I would do is to replace the battery. You can of course open it and check the connection of the battery and see if it is on....
Chosen Solution ASUS ZEN AIO Model ZN242IFDHAving crackling sound just after 2 years purchase, no longer under warranty and disappointed. Was wondering if i can change the sound card myself or its like integrated and cannot be changed? Hi, I suspect that it is integrated on the motherboard and not a separate removable module card or if not it may look like the audio board linked below for an Asus ZN2401IC....
