Chosen Solution I have a Kenmore gas dryer 70 series when I have clothes in the dryer the flame comes on but when it goes out the igniter comes on about 5 to 6 times before flame comes back on with out close the flame goes on and off like it supposed to someone figure that one out. You have intermittent coils, a very common problem. The coils are part number 279834 and are mounted on top of the gas valve....
Chosen Solution Hi guys. First timer here, and I have an iphone 4s that doesn’t turn on. I don’t know what happened, it didn’t fall or anything it just stopped working. It doesn’t turn on and gives no indication that is charging. I googled to try to solve this and I tried home+power trick but it didn’t’ work. I tried plugging it to the wall and do the home+power and it didn’t work either....
Chosen Solution replaced a lcd screen on an iphone 5 and everything was working fine. the battery was charging. then went to charge it before i wen to sleep and was at 28% woke up and it was at 13% while plugged in. i connected to my computer and itunes and it comes up and will sync but the battery wont charge and i do get the charge symbol both times....
Chosen Solution Hello, I succesfully changed my iPhone 5s battery. Everything went ok, I just had a little trouble taking the battery out, but didn’t damage anything. I followed the guide backwards and went plugging everything in step by step. I closed the phone and everthing works just fine. The only thing that doesn’t work is the motion sensor. I have noticed that neither the compas or the Health app detect any motion....
Chosen Solution So to get this out of the way first. I have already Replaced the Battery and the screen on the phone. This was about 4 or 5 months ago. The phone has been working great until today. My sister knocked the phone out of my other sisters hand and it dropped. The phone had a case on it but it still dropped. My sister said that she pushed down on the screen and the screen popped back into place....
Chosen Solution theoretically if I wanted to replace an iPhone 8 home button could I use another iPhone’s home button and logic board? It costs as much as the whole phone, then you still lose TrueTone and battery health, preserving those would require swapping the battery and the screen over, so it’s literally the whole phone. So you could, but you wouldn’t. yes if the button was from the same logic board?...
Chosen Solution Hello, A iPhone 8 I recently bought has a replacement screen. Now the screen sometimes freezes and then unfreezes again. When you do something during the frozen time on the screen it will do everything you did during the frozen time. Is this down to a bad screen, or a motherboard fault does anybody have any suggestion? I don’t have a known good or any other iPhone 8 screen by hand at the moment of writing so can’t test myself....
Chosen Solution Problem :My iPhone 11 is constantly rebooting and will not boot up. I’ve tried too go in and out of recovery which has not worked as well i have tried updating the OS through iTunes which resulted in a “failed install” This all started when I received a “iPhone full storage notification” after that my phone crashed and started boot looping I have important photos on my phone I don’t wanna restore it without having my data secure ,my iPhone isn’t connected to iCloud and isn’t backed up....
Chosen Solution I went to the beach the other day with my sister out of town, and mistakenly dropped my iPhone 7 plus in the water. i quickly dried it off with my towel. Everything was going fine until I noticed the screen going in and out. So i then powered off the phone and took my case off of it while I waited till I could get back to my car....
Chosen Solution so on June 30, 2018 I falled in the lake with my iPhone 7 Plus in my fanny pack its been a year is it possible to fix it without taking it apart In 2018 u was wearing a fanny pack??? I really want one… U havent described ur actual problem with the phone to really help properly, what is the issue with the phone what’s it doing and what’s the last thing u did before it stopped working....
Chosen Solution I had broken one of the bottom hinges on my GoPro and could never find it, now I am looking a way to replace it as with only one hinge the camera can not stay up on its own yes you can the easiest way is to remove all the latch completely or get a replacement from high street tech part kiosk or shops
Chosen Solution I recently bought a Sony SRS-XB22 as I’m obsessed with portable speakers. The speaker is an overall a good bang for your buck with one down side, it’s battery life. I already own a JBL FLIP 4 for a long time and I enjoy it very much. They both have pretty much equal battery specs as a 2700mAh in XB22 and 3000mAh in FLIP 4. When I use them I can see a very huge gap in listening time of these devices....
Chosen Solution Service guy ( who never returned!) says it’s the ball bearings. Any idea of how much this repair might cost? Is it worth repairing? My machine is 6 years old. I had this done with our washer and it’s cheaper to buy a new washer those bearings are not cheap the service guy was going to charge us $500 up to $1200 except I had a warranty so you might as well go grab a shovel and bury it sorry for your loss....
Chosen Solution Could someone point me in the right direction of where to find the guide to replace a1708 mbp keyboard? just cant seem to find it. thanks The reason you can’t find one is Apple is servicing the Butterfly keyboard issues for free! They are replacing the full uppercase assembly transferring your display, logic board and bottom cover over. Keyboard Service Program for MacBook, MacBook Air, and MacBook Pro You can do the same using one of these: 13” MacBook Pro Top Case Assemblies - Space Grey (16/17)13” MacBook Pro Top Case Assemblies - Silver (16/17) Even if you wanted to replace the keyboard alone is not an easy job as there are riveted in!...
Chosen Solution My phone screen won’t let me even unlock it. I can only type things if I press them over and over again, and I don’t know what the piece is called that need’s to be repaired/changed out can anyone tell me what the piece is called? The front screen assembly part that receives the touch input is called the Digitizer. The replacement part would be the entire front screen assembly, as it contains the Digitizer....
Chosen Solution I have a visio m551d-a2. Two very small, but very black, bugs have managed to crawl between the front protective clear panel and the lcd screen. How do I remove the bezel or screen to clear the bugs out? They are definitely bugs and not dead pixels as these have little wings. @aforney you’ll have to remove the panel et al from the back. Big job, so take lots of pictures when you take it apart to remember how to put it back together....
Chosen Solution My Panasonic tv has blue and red horizontal lines going down the bottom half and I need to know what’s wrong so I can see if I can fix it myself Update (06/08/2019) . Here is a picture of make and model @dopenay this looks like a panel driver board issues (it is considered part of the panel and cannot be replaced separately. Of course it is also possible that this is a RAM error on the main board....
Chosen Solution Hi my 2005 chevy equinox is making like a low rattling noise while idling on park.its kind of annoying i just did an inspectiin and passed. If i hit the gas it goes away but while idling it does it what can it be? Please help other than that the car working wonderful. I had just changed all my mount, oil pan gasket, changed oil, did a tune up changed the breaks and ran it thru diagnostic no codes....
Chosen Solution Hello! My Mid-2013 MacBook Air stopped charging entirely the other day, while I was using it. (I noticed the light on the MagSafe turn off). I continued using the machine until the battery was nearly dead, assuming I could just continue working and reset the SMC and fix the issue. Resetting the SMC did nothing. There is absolutely no light on the charger. I’ve tried three different chargers and couldn’t get a light on any one of them....
Chosen Solution I bought this scooter and it was running fine first couple days then it started flooding out worse each time I rode it. I took the carburettor off and was going to check the float when I notice the housing on the carburettor where the float is was cracked. I guess the last owner tighten the screw down to much to crack the housing. This gave me reason to buy a new one....
