Chosen Solution Hello and congratulations for the site …. My problem is that HD2 is no longer able to start some time. by the various attempts I made with technical, it appears that the problem is the motherboard. If you can put a guide on how to mount it and maybe buy it from you. Thanks and good luck! If you are interested in checking out the teardown and to replace your motherboard, here are the guides that i use....
Chosen Solution The teardown indicates the Mac mini 2018 ships with the Murata 339S00458 for 802.11ax/BT 5.0. I’m considering using it for a PC build. In the Mac mini’s case, the chip is soldered onto the logic board. My hope is to learn, what if any interfaces it might be available for ‘regular’ vanilla PCs. PCI? M.2? Something else? Been checking murata.com but nothing helpful so far. If you can share any knowledge, thanks :)...
Chosen Solution Hi all, Fellow Pro user here. Would appreciate some from those knowledgable with hardware repair! I have a late 2013 Macbook Pro 15 inch Retina. It’s primary display is no longer recognized, and according to Apple Diagnostics it is suffering from error codes: VFD004, VFD005, and VFD001. The internal display is currently not recognized, but it works perfectly on an external display. I’ve replaced the LVDS cable, and for 24 hours afterwards, the internal display functioned perfectly....
Chosen Solution I just changed my digitilizer and my phone works but the back panel will not fit back on. I know how to put it one but it just won’t fit… Please help and Thank You everyone! Redo the repair and check that nothing is out of place. Are you sure you have an iPhone 4? On the iPhone 4 the LCD+Digitizer+glass is one unit, and is replaced as such....
Chosen Solution Ok so my iphone 5c has been working fine the past 3 weeks, full signal when I should have had it. On Thursday last week I let the phone completely die, then when I turned it on it said searching in the top left. I took the sim out and it didnt make a difference, the no sim card warning did not come up. I turned phone on and off still no luck still said searching....
Chosen Solution iPhone 6 logic board is dead. No water damage. Previous owner said that it showed error 4005 when restored however iPhone does not power on nor detect on iTunes. I have disconnected everything except battery (known good). Followed this video https://www.youtube.com/watch?v=GHw1WX-C… and everything looks good so i’m guessing that the power management unit is fine. No shorts on vcc_main. What should I check for please? Note: Phone may have been dropped once as there is a really small bend in the frame....
Chosen Solution My grandmother gave me an iPhone 5S, that she said did not work, didn’t hold a charge. I plugged it in and unplugged it, and it showed symptoms of a defective battery. So I replaced the battery, and reset it, but it won’t charge. If I plug it into the charger, it recognizes the charger, even tells me its charging, but never charges. So the battery died, and it gives me the, the battery is dead , but it’s still charging sign....
Chosen Solution The screen flashes white while charging. Iphone will not come on. I dropped the phone however it had a rubber case. I don’t know if it is a battery issue or what. id check the battery connection first, then if that’s fine maybe try another screen, if still no joy disconnect everything apart from screen, battery and power button flex and see if will come on then.
Chosen Solution A customer bought an iPhone abroad that was refurbished. Used it for 2 months and now it’s not working. It suddenly died on her during usage. I tried charging it and it switches between 1A, 0.4A and 0A. Every 2 seconds it switches. I can put it in DFU mode, but in itunes it gets stuck on “waiting for iphone”and in 3utools it gets stuck at 11% with the error ünable to switch DFU mode to recovery mode” when I try to restore it....
Chosen Solution My friend asked me to fix his ipod and i plug it in try to reset it nothing happens. It wont turn on.Can someone Please Tell me why? Could be that the battery is broken or the connector is broken. How long did you leave it on the charger for? I’ve had an iPhone that had been not used in a while that I had to leave on the charger for like 3 hours before it even turned on and when it did it had like 2%....
Chosen Solution Is it possible to replace the top screen on the new 3ds? Yes although it is super difficult to perform. I have repaired alot of electronics and this one actually frustrated me the most and one of the only repairs i gave up on here is a link to a video if you dare to attempt the repair on your own. https://www.youtube.com/watch?v=fzK6Q74d…
Chosen Solution I purchased a used iphone X with cracked glass and no Face ID. I planned to replace with an OEM screen and could have done w/o the Face ID. But now I realize that even the true tone is missing. So is my display already a replaced one or is original? How can I make out this? If face Id and true tone are both missing the screen has definitely been changed....
Chosen Solution My Xbox one 500gb is complete crap, I bought it off craigslist and not knowing it was not going to work I paid 200, yeah yeah it was very stupid of me. I contacted the police but it’s difficult. Anyway the Xbox one hardrive is bad, when i turn it on it has the black screen of death now I already tried all the trouble shooting exactly it just gets stuck at the same part and gives me a error code of e101....
Chosen Solution Hi @stefanh3 , Here’s a link to a video that shows how to partially dis-assemble your headphones. Once dis-assembled you can use an Ohmmeter to determine the connection problem between the left and right speakers. If it is a fractured wire in the swivel joint of the headband you may be able to work out how to pass a new wire through the headband. Although it also may be something as simple as a dry solder joint connection on the circuit board....
Chosen Solution SAMSUNG UN48JU6400FXZA - 85L3CVG801921E - PURCHASED JAN 2016 Just won’t turn on. No red lights, no remote access. I’ve been told to replace the external power supply. Any help in buying this? bill P not sure what you mean by external power supply. The UN48JU6400FXZA uses a BN96-35336A power supply board. I’d Check the fuse on that first. Post some images of your power supply board with your question so we can see what you see....
Chosen Solution Hello, My 13” MacBook Pro Mid 2014 is starting to act strangely. My system suddenly turns off, and when I try to restart it I don’t get a response. It took a few days or maybe 12 hrs until I could turn it on. But, when it turn off properly it acts this way again. I’ve done Power+Shift+Ctrl+Option All it did was just change the color on MagSafe, and when I press the power button, it still will not boot up....
Chosen Solution I was doing laundry and machine was working perfectly until it got to a point where water gets drained.. no any kind of sound or noise that it’s even trying to do anything, water just sits there in a washer.. Any suggestions what is happening with it? Is the load balanced? Is the drain hose clear and unclogged and unkinked? Lid Switch Assembly If the washer won’t drain the lid switch assembly might be defective....
Chosen Solution Please I am in Nigeria where can I fix it? You may buy a galaxy s6 back cover replacement online and fix by yourself. My question is not answered as I needed to know where to buy from before fixing the rear glass.
Chosen Solution My child put a password on my tab. I cannot unlock it. It Just keeps saying i should try again in 30 seconds. Please help Try hard reset. Put it off, then press home button, power button and volume down button. After 5 second release the volume button but hold the rest. Hardreset it. apple ipad a1430 32gb hard reset
Chosen Solution So I have thin lines all the way along the screen. They are always there but they used to fade after the TV had been on for a few minutes. https://imgur.com/gallery/mJVenuv Hi, Ouch. Horizontal lines usually indicate a faulty LCD panel. Vertical line(s) could be either a faulty tcon board or Tab connections to the panel. The tape that holds the LED’s in place may have dried up and loosened (that’s what happened to my Samsung) New tape will fix he problem....
