Chosen Solution Hey guys i have an iPad pro 9.7 with a cracked screen, but the LCD is still completely fine. Is it possible to replace the glass only? hello Oddvin, yes, it’s possible but more exactness needed. Personally I prefer a brand new set (replacement one) - as a result, it’s cheaper and done quite quickly (in fact, time is money too). There is a guy in LA who does it in the required quality....
Chosen Solution Is the battery replaceable on the Surface Laptop 4 15"? Also do they sell replacement batteries for the laptops? Sonny Medrano looks like it’s possible but a royal PITA. Anyhow, go through the service guide published by Microsoft Surface Laptop 3 And 4 English Service Guideand check this video as well (yes 13" model but looks like the step are very similar) and see if that is something you want to tackle....
Chosen Solution The pressure sensor on my toothbrush seems to be broken, it gives constant red light even though the head isn’t pressed to anything. Oral-B have asked me to clean the metal pin with warm water to clean up toothpaste build and drain the battery and recharge it again for 24 hours to fix. It doesn’t work. Any fixes? I took apart my oral b 7000 to fix this issue, pressure sensor light always on, causing a reduced amount of power....
Chosen Solution I maintain 120 Macs & have had very few kernel panics over the years. Over the past few months, I now have a dozen iBooks that won’t work or will work only in single-user mode. Five of these are 1.33 Ghz. I’ve read much on iFixit about iBook KPs, including the Airport-on-logic board problem. Thus far I’ve tried only software fixes (applejack / disk repair / memtest), with little/no success....
Chosen Solution I have a Yamaha p45 digital piano, and sometime in the last month the light kept itself on and wouldn’t turn off, even after pressing and holding the button, with no sound at all. I decided to plug it off and plug it in again. The light turned off finally, but now I can’t get the piano to turn on anymore. Any tips? Do I have to replace a fuse or get another power supply?...
Chosen Solution When I turn on my laptop the Toshiba logo comes out as normal but then it turns all black and a message comes out that says “reboot and select proper boot device or insert boot media in selected boot device and press a key”. I have tried several things. There was one method that worked for many people and it was to go to the bios menu, disable the secure boot then go to system configuration and change the boot mode from Uefi to csm....
Chosen Solution I keep blowing fuses on my rain bird esp-8tm and then it reverts back to Pwr off Hi @menyv , Does the fuse blow immediately or when you start the controller to begin a watering program? If immediately then there is a problem in the controller. If only when starting a watering program then one of the stations in the controller or one of the solenoids (or the pump start relay / master valve), may be faulty....
Chosen Solution I need the rescue password for the date of 2018/04/05 please Hi All, For those having password issues, Please visit this link below. https://pastebin.com/L3c3rySj Subtract current year and get the password e.g. 2018 - 10 = 2008 2017 - 10 = 2007 .. etc For example: At the password prompt, press alt+rTake note of the date displayed. For me it was 2017-05-11Use Ctrl+F to search the paste bin for your month and date....
Chosen Solution I own an iPad Air 2. Recently, the charging port has been “loose”: the charger keeps falling out of position and wiggling is required to get it to work right at times. There are times I walk away while it is “charging” and come back to find it not charging. I visited an Apple Store today. Was told that my charger port “expanded” because of using non Apple chargers....
Chosen Solution It’s not leaking or overflowing, but on laundry days my septic tank fills up too fast. Same top load Samsung washer for years, but this has only been a problem the last month. Is this possible or common? What are the likely culprits? That’s not possible. Sounds way more like a septic tank problem. Is your septic system serviced and pumped regularly? Do you dump a lot og grease down your kitchen drains?...
Chosen Solution Can I move a xbox HD to another xbox with out any problems.do not want to lose my music. If your music is all you care about, open up the Xbox with the below guide, and remove the hard drive. If you have a SATA to USB adapter, use it to mount the HDD to your PC. If not, you’ll need to get one or unplug the DVD drive and put the HDD in place (do that powered down)....
Chosen Solution A few days ago I tried to install an SSD along with the original HDD, using the tools and instructions from here: OWC Internal SSD DIY Kit for All Apple 27" iMac 2010 ModelsHow to Install a 2.5" SSD behind the optical drive of a 27" iMac Mid 2010 Everything went smoothly but, sadly, when I closed back the computer, it would not power up at all. I opened it again to look for anything that might look off, but I did not found anything obviously wrong....
Chosen Solution Recently aquired a kenmore elite HE 3t washing machine there was a problem with it powering on i removed the front cover of the machine to discover that the control circuit board wires were not connected i need to know where they connect on the board Step #4 on this guide shows how the wiring harness is hooked up: Repairing Kenmore Elite HE3 Washer Control Board Relays
Chosen Solution Hi @Nicky Lyddon What is the model number of the TV? Some things to check: Is the TV connected to the internet? If so try disconnecting it from the internet and see if it still happens Try removing the batteries from the TV remote control and then check if it occurs, just in case it is a remote control unit problem. Also if it still happens with the remote disabled, try covering the IR window in the bezel below the screen (look in the user manual to find out where you should point the remote to on the TV) just in case there is something else triggering the TV via IR (infra red) Check if there are any “timer” options in the TV menus that may have been set....
Chosen Solution So after replacing the LCD and power/volume buttons on my iPad 4 my iPad will bootup but default to recovery mode. I have tried all the obvious solutions to fix the problem like the iTunes update route and power button/home button combination route with no success. The screen appears as normal and looks completely fine. I am wondering if anyone has had any similar issues. Could it be a screw I put in the wrong spot, or could I have damaged a small part on the board that I can get fixed?...
Chosen Solution Hi All, Had an iPhone 5 come in with broken LCD and non-functioning home button. Replaced the LCD without an issue however can’t get the home button working. The two metal “prongs” on the bottom of the phone that correspond to the home button pads all look OK and when shorted with a pair of tweezers they do activate the home button functionality however when the phone is closed and sealed up the button doesn’t do anything....
Chosen Solution I received this iphone 5 from friend. I tunes recognise it, and if it asks for itunes or charging icon the image is not distorted…But, as you can see in the images attached, i made recovery without error, and when it starts while iphone is running it creates random artifacts…the letters are also distorted, and mixed up… it seems when iphone is trying to change pictures on the lcd that there is some error, and part of the screen changes what it shows and other part shows something else....
Chosen Solution I have ordered (and received) an iPhone 5s LCD Screen and Digitizer repair kit for an iPhone 5S model A1457. When I lift out the front panel as described in the guide, the front panel comes of but the Home button is fixed on (I think) the speaker. The screen itself is clued to the body without any screws. Seems like the repair kit cannot be used for this iPhone 5S model....
Chosen Solution Hello, recently I bought i secondhand iPhone 12, but I was scammed. The iPhone doesn’t charge with the lighting cable. It charges only with the wirelessly charger. Actually, when the phone is off and I’m trying to charge it by cable, it is showing that is charging, but it doesn’t. (Battery level doesn’t go up.)When the phone is on and I’m trying to charge it, then nothing happens, no charging indication at all....
Chosen Solution Got this iPhone 6 in with another iPhone and was planning on selling it off as I didn’t need it. I checked that everything worked etc. When I took the case it came in off (Tech21) I noticed that the bottom right corner makes a clicking noise when pressure is applied in the bottom right area, and the bottom part of the screen that screws into the frame near the charging port is slightly raised and when pushing down makes it flush....
