Posts

Chosen Solution My dad isn’t really into technology and just makes calls thats why he still has that phone so please dont attack me. Anyways, when I call him, all you hear is a very loud hissing noises and I believe one of the mics are broken. I have done some research and did the troubleshooting. During phone calls and facetime calls, there is just a loud hissing. I went into voice memos and could hear myself clearly, I recorded a video with the back side camera and everything was clear but once I tested the front one, I heard the noise....

Chosen Solution Hi, My IPhone was 3 years old and the battery was beginning to become very unusable due to the battery life. I ended up replacing the battery myself with one I ordered off the internet. For the first month the phone worked fantastically. Two days ago after my phone battery died whilst I wasn’t at home the phone will no longer respond when plugged into a charger and after going to the apple store they simply said it no longer works and is unfixable....

Chosen Solution If the fusion drive is replaced with an SSD, based on the architecture similarities, it looks like the iMac 27” could fit the dual fan system from the iMac Pro. Would this be possible? Has anyone tried it? Would it improve performance, especially on the i9 processor configuration? Other than the looks from the outside the internals are very different between the iMac and the iMac Pro. There is no means to physically fit either the fan’s or the SSD’s between the series....

Chosen Solution Hey, I am on vacation and my iPhone 12 max pro slipped Into the pool. It was in 2 feet deep water and 5 minutes max. I thought the 12 max pro was supposed to be water resistant for up to 30mins but somehow this caused condensation to build up in the 2 left cameras and front camera. initially this causes Face ID to turn off and it later experienced problems with the sim....

Chosen Solution So, lately, I’ve been having an issue with my PS4 controller. I think it’s broken, because when I stand idle in a game, the controller moves my character up/forward without me moving the left analog stick. This happens in short stutters, and no matter how many times I click my left stick, it always happens again. I’ve had this issue before, and it got worse to the point where it was unplayable....

Chosen Solution Is replacing the power adapter jack possible? Would that mean unsoldering it from the mainboard, finding a replacement jack, and then soldering the jack into the mainboard? That sounds pretty adventurous. Yoga 720-13IKB (Type 81C3) Laptop (ideapad) - Type 81C3 Model Name: 81C3 Mfg Date: 17/10/09 MTM: 81C3000LUS Page 50, 51 of Hardware Maintenance Manual shows the power adapter jack. For Lenovo YOGA 720-13IKB, the AC power adapter jack is compatible with Type-C USB 3....

Chosen Solution Can i add an ssd ALONG side 1tb hdd already installed ? From what I can gather here, it appears there is only 1 drive bay. Your results may very. If this has a DVD/Optical drive, then may be you can buy an Optical Bay Hard Drive Caddy.

Chosen Solution I’ve got an s7 and I would like to know if the daughter board is the same as the s7 edge. The daughter boards are different throughout each Samsung model. You would need to get a daughterboard specifically made for the s7 Like as said by others, the charging port daughterboard is different from edge and non-edge models specifically on the two touch sensitive buttons used next to the home button....

Chosen Solution I just noticed some minor screen scratches and I was wondering if there is a DIY way of removing them. What has worked for you? There isnt any true do it yourself way to fix scratches, at least one you can see changes doing. You would have to find a product on the market that can fix scratches but even then it wont be perfect. Like Austin said the screen will not be perfect....

Chosen Solution Can I manually fire the Nerf Dart Tag Swarmfire with the device not turned on? The power switch is found on the top of the Nerf gun near the stock end. The only way to use the Nerf gun is to turn the switch into the “on” position, it does not have a manual firing feature. You could if you found a way to put some sort of hand crank on it

Chosen Solution something was thrown at the tv causing it to now be broken.. it has like a rectangle chunk of lines going from top to bottom but stops about mid screen up until the point of impact where there’s like a circle crack where the object hit, they’re like a blueish color. There’s no sound and no picture. @tharris123 what you are describing sounds like a broken panel. Panels this size are almost non-existent for repair and even when available they cost considerably more than a new TV....

Chosen Solution This is the Mac mini Server 2011 i7 Model. So I bought this kit. https://www.amazon.com/gp/product/B00SNM… The issue is the following. When I put a 8GB module on the bottom slot. I get the 3 beeps 5 seconds pause error. When I put it on the top module it works. So now I have the original 2 GB stick on the bottom slot and a 8GB module on the top slot....

Chosen Solution Hi after display replacement everything went good, but after few days screen went red. I did dfu but it shows me 1671 error and white lines on screen. I tried to replace everything(battery, display, charging port). PLEASE HELP ME. I tried to restore on 2 PC. https://www.youtube.com/watch?v=NEsP_fwi…

Chosen Solution Hi guys! I just upgraded my Mid 2012 Macbook pro from the stock 4GB ram to 16GB ram and it feels much heavier, takes a long time to boot and beach balling with 2 or 3 apps open. I had upgraded to SSD 4 or 5 years ago and it was working fine but a few weeks ago it started beach balling with too many chrome tabs or heavy excel sheets....

Chosen Solution (I know, kind of an older model). It leaks underneath during cycle. It’s obviously happening during spin and I can see the actual holes where it is coming out but I don’t know what is causing it. Can anyone help? The last one is from underneath and I can see the water is coming from the tiny holes at the middle of the “wagon wheel spokes”. Update (03/24/2019) Model # :11028092700...

Chosen Solution A few keys have suddenly stopped working. They are the letters from S to L in the second row. Apple service says need to replace the entire keyboard. Is there any other solution? Replacing it will cost a lot! Around $320. No, damage such as dust or liquid. Not sure what caused it. Untitled If you are sure you didn’t spill any liquids into your system or use any spray cleaners onto the keys then I suspect your real issue is a bad battery....

Chosen Solution Just connecting new brother Printer through wifi. Both items are receiving wifi but the printer won’t print from the computer. It scans and copies. 1.) If you search for the printer, with the WiFi on BOTH items signed in on your Apple and if you don’t see the printer then you must either check your printers installition instructions under your Apple product for what you need to finish the set up 2....

Chosen Solution I’m having trouble removing the home button screws, I’ve tried two different screwdrivers and they’re not budging. please help Two two screws are just Philips #000. Assuming you’re using the correct screwdriver and you haven’t stripped the screws, a good way to get a tight screw loosened is to actually tighten it a tiny bit first. This “breaks” the seal that the screw may have with its matching thread, making it much easier to loosen and back ou....

Chosen Solution hello I made a mistake by installing Rom on my phone umidigi a5 pro I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time and a black screen appears, I cannot do anything until I restart it and the same process is returned please anyone can help me...

Chosen Solution I had glue in my fingers and accidentally glued my charger into the charging port of my iPhone pro max. How do I get it out? Two options and there is the possibility that option 1 won’t work so you will have to use option two. Option one: open the phone up and disconnect the battery. Then take a qtip soaked with acetone until it breaks down the glue then pull it out....