Chosen Solution Hello guys, Can iPhone 5c inner components fit in iPhone 5s housing. I’ve iPhone 5c and iPhone 5s back housing. It wouldn’t work too well, the housing for both phones are differently in terms of the buttons fitting correct. You’d also have problems with the speakers and microphone. I would not suggest.
Chosen Solution Hello When i replacement power button in my iphone, i lost thing in pictures. I don’t know what it is. Can someone help me where i should put this in iphone? lost lost2 iPhone 5s Power Button Replacement Its either the part from step 49 or 51.
Chosen Solution So my camera cannot focus on near objects, it focuses on the background. I tried replacing but still the same, reset too. A tech said that it is in the board. Also, Awhen i removed the camera a blue part came out does this cause my compass and running apps not work screen rotates work. how do I fix that? my front speaker and mic won’t work either did I might have touched or moved anything in the process help please...
Chosen Solution I fixed a 7 Plus for a customer the other week and he told me about how people were unable to hear him very well when talking on his phone. I had him call me and I couldn’t even hear his voice at all. I was going to replace his ear speaker but I accidentally grabbed a 7g ear speaker from my supplies. I am about to meet up with him again and put a different ear speaker in....
Chosen Solution Hello, I had an iphone 7 at my store yesterday.. the phone showed apple logo then turns off and apple logo appears again. I put the phone in recovery and updated via itunes. it was complete and I got to the lock screen typed in password. then everything seemed to work as it should. Today they came back, phone was back in boot loop. I put it back in recovery mode and itunes resat the phone back to “new”....
Chosen Solution Hello Community, i could cry, after changing the whole Housing from my iPhone 7, if i click the ribbon connector into the Mainboard, the Phone shuts down and keeps bootlooping, when i disconnect it, it does actually boot up, but no signal, sound and vibration, so… i‘ve replaced the charging flexcable, did a before built in and after, before i‘ve built it in, it actually charged etc. after it was in there, i could again not start it, im honestly so sad, its just rediculous, when i plug in the old flexcable (without it being srewed in and stuff) it will start and charge…....
Chosen Solution I replaced the battery in my iPhone 8 last night and had some difficulty getting the Wi-Fi Diversity Antenna’s connector attached again. I got it in, I think… while I haven’t noticed any problems with Wi-Fi connectivity (or cellular, for that matter) is there any way to know for sure that that particular antenna is working properly? I understand it is actually a second antenna so I’m wondering if I did not, in fact, connect it properly and that I am still achieving connectivity with the first antenna....
Chosen Solution Hello Iphone S5 se reinicia en bucle indefinido I have 2 iPhone s5 Iphone S5 restarts in indefinite loop how do I proceed? best regards Does the apple logo immediately go off upon charging cable unplug? Is this only occurring when the charging cable is plugged in? If both apply, the battery is either not connected or the battery needs to be replaced due to it being faulty. Here are links to where to get battery and guide from iFixit: How to replace the battery in your iPhone 5s iPhone 5s Battery iPhone 5s/5c/SE (1st Gen) Battery Adhesive Strips
Chosen Solution So as soon as my phone is plugged in it displays the charging animation however when I disconnect the charger the screen goes blank immediately without showing the battery low animation. Intermittently it comes on but is stuck in a bootloop. I have found that bootlooping issues that occur only when plugged in may be caused by a battery issue (disconnected or connection issue). Has the battery ever been replaced before?...
Chosen Solution Hi guys, today during playback, screen on my ipod Went black but song finish playback, then all Went Down. Restore doesn’t work, PC not recognize him, (windows says " connect device to computer) when put ipod Closer to my ear there is humming, So hdd Is Broken? Device was charged. Please help. Try holding Menu and the Center button for a few seconds. If not, you may have to repair the device....
Chosen Solution Hi, i have a ipod touch 5th that won’t turn on. I connected it to an ammeter and it shows that it’s charging but i can’t get it to turn on at all so i assume it could be a logic board issue? I couldn’t find and info but is there any way to test the logic board on ipods to see what the issue is? What I do on no power apple devices with lightning connectors is either charge the battery externally or plug in an adapter that allows powering the phone off a DC bench power supply....
Chosen Solution I accidentally went swimming with my iPhone 6 last week and it was submerged for 2 minutes, it won’t turn on. can it be fixed? Use this teardown to start your water damage repair. Then use the Water Damage Guide for how to clean up the phone. Be very careful. The guide really is important because you don’t want further corrosion in your phone. If you are able to get the phone to turn on, but have no display, you will definitely need to replace your screen....
Chosen Solution Macbook Air (Early 2011) Upon booting up the mac couldn’t successfully search for the keyboard. I intend to get this fixed myself. Please advise. So you are saying the keys on the built in keyboard are not working? Or that you are trying to connect a bluetooth keyboard? In either case, if you have a USB keyboard laying around, plug it in and see if it works on your Mac....
Chosen Solution my phone keeps on saying searching and I cant make phone calls or text Go to your phone cell phone network provider and see if there is call minutes or money in your account; call them or go to a nearby store.
Chosen Solution My son added a password on the power up screen and forgot what it is so I’m locked out. How do I get around it? I’ve try f8 f11 on start up but it goes directly to the password prompt. Hello Colter Kuipers I would recommend downloading a password cracker to remove your forgot password this link cant help https://www.youtube.com/watch?v=Z13fLYiF… The over way i know is manually on the computer this other way is harder is you are inexperience i can explain it but here is a link of the same way of doing it https://www....
Chosen Solution It will show shadowed like images rhonda.maze shadow on a dark screen?. Shine a flashlight at an angle against the screen just to make sure we understand you correctly. If you see shadows, silhouettes it is your backlight that is not turning on. This is commonly caused by a bad power board or a bad backlight array. You would have to remove the back cover from your TV and take a look at the power board etc....
Chosen Solution I have a Sanyo TV model# Dp42840 that turns on for a few seconds but shuts right back off…Does not ever show the red light but will shine green light when power is on. I can’t even get it to stay on long enough to program a universal remote to it Question: I have a Sanyo model #Dp42840 that turns on for a few seconds. Answer: Amy, I believe this question has already been answered: TV turns on and shuts back off
Chosen Solution When I charge my MacBook, I get the amber and green light to show it is charging. However, one day the MacBook turned off and won’t turn back on. My confusion is sometimes it does turn on, like randomly. I’ll walk by it and hold the power button just to see and then it’ll chime and turn on. When it turns on, it works fine. I can close it to sleep, open it and it comes back on....
Chosen Solution I ran without water too. Its not working anymore. Did anyone here fix it by replacing the thermostat ? Chandra A the likelihood of this being a bad thermostat is low. The thermostat usually works be being in touch with the liquid (water). No water no measurements so a non-issue for that. What most likely happens is that the heating element burns out. These are not good for tryin to heat up air and thus burn out....
Chosen Solution I was working on an illustration when my pen accidentally rolled and fell on the floor. After that the cursor on the display monitor does not set accurately to the point of the pen. When i set the pen on the middle of the display screen the cursor is 2 inches to the side. I tried restarting the program, the laptop nothing worked. It seems like the problem is not with the software but i think something within the wiring or hardware of the pen got messed up in the fall....
