Posts

Chosen Solution I dropped my phone in some water. It turns on and allows me to open some apps but not all apps. What do I do or where can I get it checked out? @benstey could very well be that you are having issues with your memory IC’s. You did not tell us what you did about the water damage. I suggest you deal with that first. For now you want to stop continuing to try to charge, sync or otherwise use your phone....

Chosen Solution So I was replacing my o led screen and I cut my ribbon/flex cable connected to my o led screen with metal scissors there was a very minute spark. Before I stared replacing my broken black screen I could hear the sounds made when switching on the iPhone. I could I could hear ringer sounds as well. I even managed to use Siri with my broken screen by holding the on/off button....

Chosen Solution I saw a platinum Game Boy Advance in a store as decoration, but they allowed me to take it. But anyways, where I can find a ON/OFF switch? I would like to take the Game Boy Advance… The best thing you could do is purchase a busted GBA off eBay. You’ll want to make sure you have the same pin connector for the LCD (as there are 2 different types: 32 & 40 pin) as the busted one you buy....

Chosen Solution Brought them in Hawaii months ago , worked great , but all of a sudden they won’t charge , and the charger hole keeps getting pushed into the headphones , so to charge I used to pull the ear muffs off to get better access , don’t know if there just cheap or I’m doing something wrong ?? @eth110697 I do not think you are doing anything wrong. It sounds more like the charging port is most likely loose and moves higher up....

Chosen Solution LCD problem 27” iMac late 2013 Hi All, Internal Dispaly is not working - external OK Diagnostic LED’s - 1,2,3, 4 ok Replaced LCD cable ( 2 pins were bent and sticked to each other ) I did a SMC/PVRAM Reset i cannot Run hardware test because i cant see anything Thank you Ouch! Sadly in the process of opening the system you managed to damage the LCD panel....

Chosen Solution The internal battery is dead, but when I replaced the AAA batteries the calculator will turn on for a few seconds and then shut off. Help Please!!! Have you looked if the old batteries might have leaked some acid that is now on the connectors? Then you would first have to clean the connectors, best done with a scratch brush like this Scratch Brush or with a knife.

Chosen Solution Like what the question title said, I opened a bottle of coke and coke just bursted everywhere. It spilt on to my key, and the space between the screen and the keyboard. I quickly wiped it up with a tissue and used clorox wipes to go over. The thing is that it’s still working perfectly fine. But, I was wondering if their is anything that I should? I can’t clean the keyboard or the batter myself because their is no way to dismantle it....

Chosen Solution I purchased an IBM 46C1748. Can you please tell me is it the same device? This is an external SAS Tape backup unit it is not a HDD and it doesn’t offer a SCSI interface if you are trying to replace an older HDD in a Mac system which used this SCSI drive.This is a Big Iron unit not a consumer or even something we deal with here. Todays drives are SATA based and the very newest systems are using PCIe/NVMe custom or M....

Chosen Solution The front facing camera of my HP elite x2 G1 is working so badly. The solution is of course to replace it with a new working one and it will be just fine. But I wonder if somehow I can improve the quality of the front camera (2MP) by either swapping it with the rear (5MP) or replace it with another that is part of some broken laptop. Is any of that possible?...

Chosen Solution Can anyone advice on where the best place to get phone parts is? You know based on good/reasonable price, quality, quick delivery, reliable etc..? go for ebay, although cheapest price may get you a lower quality repair. However if you add apple verified then its approved for repair of the phone jsymes the best place for the proper parts, the best warranty and best support is obviously iFixit. https://www....

Chosen Solution Hey all, I have an iPhone 5S to fix, the battery was always completely drain and the lightning connector was not working as it should, since it was hard to create the contact with generic cables, with the iPhone usb cable was better, but nevertheless was breaking the contact if wrong move was done. So, initially I changed the battery, everything went okay, replacement, it turned on it charged was like 95% perfect....

Chosen Solution I recently repaired an iPhone 5S screen and everything worked fine for about a week. I then updated software to iOS 9 and the Apple Logo was stuck on the screen. I tried restoring it but there was an error. I also tried DFU mode and that did not work either. I then opened the phone and disconnected the proximity sensor cable and the phone turned on and worked fine....

Chosen Solution ipod classic spin wheel and all functions not working
Hello, I have an old ipod Classic that doesn’t want to reset. I have a full charge and I see the screen briefly then it goes black. I tried the master reset by holding the middle button and and menu for a long time and nothing.
I cant get it to do anything at all… It does however play in my car… But in that I use the car’s inout to choose music....

Chosen Solution I have a strap which fell apart due to the sewing degrading to the point it flat out failed, and totally split. or I have to do this in 2 areas, but realize I may need to sew it after using the tape to really hold it together towards the end to avoid another failure. Would it be possible to use fabric glue on the areas marked in red, let it dry for a few hours to be sure and then cut the orange parts out so I can use hem tape (like this: HeatnBond hem tape), without compromising anything?...

Chosen Solution Is there a difference between the two motherboards? If I were to put one motherboard into the other would it function differently? I know it’s been a year but I couldn’t find an answer so I tested it myself, you can replace the main board of a 3G vita with a Wifi Mainboard and it will work perfectly fine, you can’t do this the other way around though

Chosen Solution I’m trying to find out why my horn doesn’t work and is there a fuse for it Hi, Here’s an image taken from the 2006 Honda Pilot service manual showing the horn circuit wiring. The circuit shows that there is a fuse #47 and a horn relay in the right hand side engine bay fuse box (I think it’s #47 but my eyes aren’t that good any more, while the owner manual on p....

Chosen Solution We are trying to find out if there is a low oil motor sensor? on a 2004 Jetta 1.8L turbo that protects the motor from ceasing up? Please advise. Thanks, Chris No, there is not. Your first indicator would be a low oil pressure light. Stay on top of oil changes, repair leaks promptly, and check your oil regularly. Keep in mind oil runs through that turbo and its quite expensive and a pain in the rear to replace....

Chosen Solution I want to know that Can I Replace Iphone 7 rear camera to the iPhone 6s rear camera and get iphone 7 result on my 6s??plzzzz tell me i am very worried about it and I can’t search it anywhere plzzz give me answer no, you can’t use iphone 7 main camera in iphone 6s. Devices are incompatible, have different dimensions, different drivers, different power supply.

Chosen Solution My JBL Pulse won’t turn on, even when I plugged in. As I recall, I didnt drop it or whatsoever in the past months. I try to reset it by push the buttons for a sec etc but it still wont work! Please somebody help me I’m desperate T.T. Thanks Its stuck in demo mode. Just plug in and then when it’s on hold the volume up bottom and the JBL connect button at the same time for like 15 seconds....

Chosen Solution Our microwave had this happen about a year ago, we would heat something up and randomly after it is finished and the timer beeps, the hum remains until we open the door. Then we would shut the door and it would hum. I read online it was something with the switches on the door, and slamming the door would fix it. It was true, I slammed the door and the humming stopped and the microwave worked fine for about 1 year....