Posts

Chosen Solution Hi! Bought an used iPhone 6 with cracked screen. Decided to change the screen myself, since I have done multiple repairs on iPhone 4,4s,5,5s etc. Managed to replace the screen with all the small parts sucessfully. Now after one day, I noticed a clicking noise on the screen, when pressing the top left corner. Googled it, and came over some people with same issue: https://discussions.apple.com/thread/655… https://www.youtube.com/watch?v=L8PybOr5… It is easy to see, that the screen is not laying 100% flush with the frame at that point....

Chosen Solution Hi everyone. So the inevitable happened. I dropped my phone and smashed the screen. The digitizer and LCD were both smashed. I have repaired phone screens before and I just wasn’t up to replacing this one. So I just got a company to do it for me. They done it well and the phone was working perfectly. I noticed however that there was some problems with the screen. 3D touch wasn’t working as it should and there was a strange white haze over the screen when the proximity sensor was activated during a phone call....

Chosen Solution My cousin recently got his iPhone 7 Plus repaired at a “professional” iPhone Repair shop and it seems like after the repair it intermittently stops responding at all. Any touch inputs would not be registered until I took my kit to the phone and unplugged the battery. Once the battery is unplugged, I connected the battery once more and turned on the phone. It works. However 3 days later, the screen is once again unresponsive....

Chosen Solution My iphone 7 plus takes about 3 minutes to start wi-fi after i turn the phone off also when i enter the about tab before the wi-fi activates the tab won’t open and freezes out , it was restored to factory settings recently aswell , does anyone have an idea of what this problem may be? does them mic work my 7 plus does this and the mic also dosen’t work (I now it has audio ic disease) I think the wifi taking longer to turn on is part of the simptoms

Chosen Solution Hi, so my iPhone 5 is pretty old, and after dying one night, I decided to plug it in. After leaving it out for the night, in the morning I was shocked to find that it had no charge whatsoever, and that after charging for six hours it still will not turn on. Now before you start saying: “Press the home button and the power button simultaneously for 15 seconds” Trust me, I’ve tried it....

Chosen Solution Hello, I have an iPhone 5c who is not booting (black screen) and when connected to a power source it gets very hot. I suspect this is a sign of a short circuit. When opening the device I noticed that one of the shields on the motherboard was bent a bit. I was wondering if this could be the cause of the overheating. Thank you! P.S. The overheating does not come from the bent shield but from the shield with a QR code on it...

Chosen Solution I opened my working late 2012 iMac to exchange hard drive (3TB fusion) against a HGST HE 6TB hard drive and wanted to replace the internal 128GB SSD from the fusion with a SSD Drive Kit and a 1TB SSD 2.5. So I opened my imac , replaced the ssd with the SATA Blade module, pluged the sata cable in, repositioned everything, replaced the 3TB Seagate with the new HGST 6TB, checked everything and switched it on, but nothing happens....

Chosen Solution Hi, I‘m consider to have my cracked iphone 7 screen fixed. I want to make sure that the screen part to be exactly the same. The screen kit I found on this website is marked as OEM, can anyone explain what does this exactly mean? Does it mean this part was used by apple or this is only an aftermarket part option? Thanks a lot for your help! Best, Yubei...

Chosen Solution When I had a scan check down on my car, it came back with a p0131 code. Is this for the upstream sensor or the downstream sensor or both? Ken Cappon, there are a few causes for the P0131 code: Faulty Front Heated Oxygen Sensor (HO2S) Bank 1 Front Heated Oxygen Sensor (HO2S) Bank 1 harness is open or shorted Front Heated Oxygen Sensor (HO2S) Bank 1 circuit poor electrical connection Inappropriate fuel pressure Faulty fuel injectors Intake air leaks may be faulty Exhaust gas leaks from here Replacing the Front Heated Oxygen Sensor (HO2S) Bank 1 usually takes care of the problem....

Chosen Solution It power up but it does not show a picture. I think you have a bricked computer, not to worry though, this can be fixed http://ilovemyxo.wordpress.com/2011/12/2… you can get the part you need only 25 bucks fuse on the lcd is open Please help me change the LCD fuse. Fuse location? Fuse value? Fuse type? What tools are required to do this job? my xo-1 is power up but the sreen is not coming on

Chosen Solution Earlier today my of decided to turn itself off and on. It wouldn’t be on for more than a few seconds, then switch itself off and back on again. It was sort of in a loop doing this. I figured it was time for a replacement so went and bought a new LG. Plugged in the new one, and it’s doing the same thing! But, if I try the new or old one in another room in the house, both work....

Chosen Solution My phone still has the apple icon and the status bar underneath it and it hasn’t moved an inch and I’m trying to access my stuff but it won’t let me what should I do? I would wait a while to see if it continues with the process. If it doesn’t, you could try a hard reset: Press and quickly release the Volume Up button.Press and quickly release the Volume Down button....

Chosen Solution Hi, I was able to fully successfully replace the screen for my Apple watch. But the gasket doesn’t hold on well the screen and suddenly pops out. Do we need to glue the screen to the gasket? you’ll need some glue yes. i recommend b-7000 glue. i use it myself for all repairs including apple watches

Chosen Solution iPad mini doesn’t turn on after screen was changed. Was the battery disconnected when disconnecting and connecting the LCD display cable? If the battery was left plugged in the chances are the backlight filter blew up which will require someone with micro-soldering experience to replace said filter. You can confirm if filter is blown if you can make out dim image display by shining a flashlight behind or on the screen....

Chosen Solution I just purchased a zero turn Craftsman Zero Turn. It ran perfect, but the battery needed to be replaced. I disengaged the wheels to push it off the trailer and now it will not move forward or back. I have checked the belts, held both transmission engagement mechanisms forward, and it still does not move. Any ideas? Make sure you got that disengagement bar pushed all the way back in place....

Chosen Solution I dropped my iPhone 5c and the screen went a purple/black colour, I tried charging it and it wouldn’t stop vibrating every few seconds, took it apart to see if there was any damage to anything inside and now it won’t even buzz to let me know it’s charging and the screen don’t even light up You damaged your LCD when you dropped your iPhone, but also since you are experiencing more problems....

Chosen Solution I have connected it to a working calculator and attempted to turn it on that way. I know there is a way to push a sequence of buttons to reset it, but I cannot find what they are. Does anyone know how to do this? https://education.ti.com/en/customer-sup… For your Nspire model, you’ll want to press [esc]+[menu]+[G] All the combinations are documented here: https://tiplanet.org/forum/viewtopic.php…

Chosen Solution I have changed my password on my phone and whenever i try to enter it it says incorrect password. I DO NOT WANT TO FACTORY RESET MY PHONE!!!!! so if you have any suggestions they will be very appreciated Thanks Try the old password. Look bro u could format it with the buttons u know. And after that ur gonna have the google acc bypass. And therea the problem for u if u could not solve that ....

Chosen Solution how to re-install mac os x lion 10.7 in my mac but i dont have its original dvd .. what to do? Find a friend who has a Mac and you’ll need a USB thumb drive (32GB or larger). Using his Mac prep the thumb drive by formatting it with GUID & Mac OS Extended (Journaled) partition. Then download from the Apple Store (if you friend doesn’t already have it) the OS-X Yosemite installer (do make a backup before you use it)....

Chosen Solution I replaced the battery on my 15” MacBook Pro w Retina display mid2014 using an ifixit kit and following all the directions. Battery powered up but now the display screen is not working. I went back and checked all the steps and all seems good. Any ideas what it could be? It does sound like you missed a step or damaged something in the process. Go back to the guide and compare the parts with yours look very carefully MacBook Pro 15" Retina Display Mid 2014 Battery Replacement....