Posts

Chosen Solution I have purchased a 128GB SSD Question If I was to keep the original drive installed and install the ssd alongside what cable(s) would I need? If I was to go with what I was thinking of doing and replacing the original drive for my SSD can I use the already existing cable(s)? Here’s the IFIXIT guide you’ll need to follow: Installing iMac Intel 27" EMC 2429 Dual Drive Kit (HDD or SSD) and here is the parts you’ll need: iMac Intel 27" (Mid 2011) Dual Hard Drive Kit If you are thinking of swapping out your HDD for the SSD you’ll have tow issues first the HDD is 3....

Chosen Solution Hi, I have purchased two headphone jack replacements for this iPad, and both have had a separate connector missing on it. After purchasing the first one, I was informed I’d bought the WiFi version, and needed the 4G version, which made sense. So I bought another one and verified via the picture it had the connector I needed. When it came in, however, a DIFFERENT connector on it was missing....

Chosen Solution Symptoms: Totally unresponsive to anything (home button, sleep/wake button, vibrate switch, USB connection, power charger connection, push notifications). No inputs or interactions can make the phone respond in any way. It is just a dead black screen. The phone is in great physical shape (as far as I can tell), has not been abused or gotten wet. My phone has been doing this a few times. I’ve always been able to resurrect it, but not this time....

Chosen Solution Hello, I have a problem with my iPhone 4S. Suddenly three days ago it gets hot without any reason. After some tests I can tell you that it gets hot when the screen is on (even with iphone in airplane mode) the iPhone is charging (and screen is off). Note that the warm side is the motherboard side. When not charging and screen off , it is OK (cold)....

Chosen Solution Hello, I’ve a iPhone 5s with bad signal. with parts can I check first, I already replace the dock connector but that doesn’t fix the problem. Also the phone is original, not a copy backhousing. Sometime radio emeters just go bad (unfortunately) the only way to fix it is to get a new logic board (may just be better to get a new phone…..)

Chosen Solution I changed the screen in iPhone 5s and while was in there also changed the battery. Now, I the charging is sporadic. I always will get the lighting bolt but most of the time the percentage will not increase. If I plug/unplug the battery a time or two and/or reboot the phone (not sure which one is making it work), it may start charging normally or may charge some and then stop....

Chosen Solution I bought some cracked screens, but when I tested them out I found that they have vertical stripes, blur, or black/negative patches on them. Also they have dead spots or do not respond at all. I suspect that damage occurred to the digitizer. Is there anyway to repair these? if so how? Included are pictures of the front and back of the screens. All them lcd screen are scrap The 1st and last pic the lcd is busted no way of fixing that

Chosen Solution I’ve got an iPhone 6 that won’t charge. I confirmed the wall charger works. I’m getting 1.19v on the battery connector when it’s plugged in. The customer said they have been using after market chargers. Could this be a bad U2 IC or something else? Buy an inexpensive USB amp meter to connect between charger and phone. This will help you see if the phone is actually charging or not....

Chosen Solution When I plug in the phone into iTunes, the computer recognizes it. The screen then turns on the apple logo sign but then the logo sign goes away. However, I could still see that the LCD is still on but it won’t display anything. I tried restoring it but then when it is half way through it says “iPhone could not be restored error -1”. What do you think could be the issue?...

Chosen Solution Hello guys so yesterday 31 Dezember I replaced the xr Display and then the iPhone started only when plugged in had a bootloop iTunes and 3utools didn’t work I also don’t own the original display because ist got replaced before by someone else Hi When you replaced the screen did you unplug the battery? If you did it might be worth checking how well the connector is seated as a poorly seated connector can cause a bootloop Also if the battery wasn’t unplugged it could have caused a board level issue which would need further investigation Hopefully this helps Any questions please ask Thanks:-)

Chosen Solution I opened up my 4th gen iPod to fix a jammed lock/sleep button. I had turned it off before working on it as a safety measure. Now I haven’t been able to turn it on. Even if I connect it to iTunes the screen doesn’t light up. Hey Kathy, So iPod TG4’s are infamous for being finicky devices, the first thing I would try is to bridge the connection between the metal on the bottom of the charger port to the positive battery terminal....

Chosen Solution I Was wondering if it was safe because I was looking around the back of the phone for a while seeing where things were and trying to figure out something while the phone was still on, is there anything that could’ve harmed me like an ir laser that I can’t notice, other then obvious chance of getting shocked. Hi, May be wrong, but the User Guide for the phone doesn’t mention the it has IR capability so that should be one less worry for you....

Chosen Solution Is there a possibility to change the front glass Google Pixel 3 by the help of LOCA UV glue, instead OCA glue? I’ve bought a LOCA glue, LCD separator.. and now thinking about, which is better: 0.03mm or 0.05mm tungsten wire for separation is better? In the end, when i’ll separate the cracked glass, can i apply a LOCA glue on the POLED matrix to attach a new glass?...

Chosen Solution Hello, I’m experiencing some issues after replacing my screen. I’m getting a lot of ghost touches when scrolling, and every few days the screen goes crazy with clicks. Completely unusable. Can’t do anything but hard reboot which fixes it. The Keyboard is a bit off. Most gestures work, but only if you use a different one each time. Example: You can’t use ‘V’ twice in a row. You have to do a different gesture each time or it won’t respond....

Chosen Solution then i turn it on it go off quick wont say on Please check whether your symptom matches The Sony CFD-S05 unit will not power up . I added a detailed answer how I fixed the device there.

Chosen Solution Can you fix or repair a device when the console does not recognize a joy con when attached, but works if dettached? I have tried mutiple joy cons and the console will not recongize the one on the right. i have done all trouble shooting i can … i think its a hardware issue. Hi You could replace the joy-con rails or try cleaning the bit with the arrows on it with isopropyl alcohol Joy cons rails can be fairly easily replaced There’s plenty of YouTube videos showing how to do it or guides on the internet You could find the parts on eBay or AliExpress for a reasonable price Hopefully this helps Thanks:-)...

Chosen Solution The washer wouldn’t spin changed the coupling, the capacitor tests normal, the tub fills then it makes a buzzing noise won’t go into wash or spin. The model number is 26432503. Could this be a timer problem? Any help would be greatly appreciated. If your Kenmore 110 Series Washing Machine is making strange noises, see the Kenmore 110 Series Washing Machine Makes Unusual Noises problem page for possible causes and solutions....

Chosen Solution Can’t hear anyone unless on speaker and also wen turning up n down it’s saying earphones though I have none in Always preform a hard reset before attempting any repair. (Home and Power button together for 15-20 seconds) usually this is an issue with the SubPBA Flex. (Charge port and headphones jack) Start with a Software reload to verify it isnt a software malfunction. (This will erase all of your user data) afterwords, if it didnt fix it, replace the above suggested part....

Chosen Solution TO ifixit team i am using nokia 2690 due some reasons i forgot my security code and bcoz of that i cannot lock my keypad with security code..plss help me in solving my problem i am giving my phone details below nokia 2690 v 10.10 22-04-10 RM-635 IMEI-353777042003349 i forgot my password my mobile in not spport facebook Update (06/06/2016) my mobile in not spport facebook

Chosen Solution I can record video but it has no audio playback. The software controlling the audio driver may have crashed. Restarting the device by holding the power button down for 5 seconds will reboot the device and restore audio quality. Flip Video Ultra Troubleshooting