Chosen Solution I have a malfunction in the power circuit, the device is not responding to charging Here is a link to the HP Elitebook 740 G1 Service and Maintenance Manual: Hp-Elitebook-740-G1 Service and Maintenance Manual I guess you checked that the charger is working correctly?
Chosen Solution Hi, If replaced correctly it will work just like the original did, the only chance it won’t work is if it is not installed correctly or a faulty part was sent out. :-)
Chosen Solution I have a iMac that powers on which shows there is sign of life however the white light remains and no display or sound. What could be wrong? I’ve had this problem myself, it can be a bad display connection or RAM not being seated correctly. Do you see any glow in the display in a darkened room? Does the system Bong and/or hear the fan when you start the system?...
Chosen Solution I have a Instax mini 9 and my little sister accidentally pushed the film in with her fingers and she damaged the film and now her camera doesn’t work i tried to put new batteries because the red light flashed and i put the new batteries and doesn’t wanna The mechanisms on Instapix are pretty basic so i’m sure you can get it working. Take out all the film in side the camera....
Chosen Solution is it possible to put the screen and hard drive of a 120GB ipod classic 6th gen into a 160 gb ipod classic 7th gen?? please help, post if you need further details This topic needs some clarification: there is NO 7th generation iPod classic. Any parts from the 80, 120 and thin 160 gb models are interchangeable. The only issue is with the back plate, as it will show a different capacity....
Chosen Solution My iPad fell off the bed while charging, bending the Lightning connector slightly, so that I had to prop the cable up on something before it would charge. Now, though, it has gotten worse, to the point of hardly charging at all. Is there anything I can do to remedy this, short of replacing the logic board or doing microsoldering? [] try another cable if they work… [] if the pins have been damaged but workable, try something like a “magnetic usb charger” for Iphone/ipad, they’re cheap and they snug fit into the device’s port and wont have to be removed at all....
Chosen Solution Disclamers: I use the larger original usb plug to charge (not a small iphone brick or my laptop). And a car adapter that is rated for iPad. There is no water damage. It was dropped a long time ago but has worked without problem before and since. Today my iPad (2nd Gen) stopped charging when I plugged it in. Nor is it recognised by iTunes when I plug it into my macbook pro....
Chosen Solution I’m helping a friend try to recover some data from her iPhone 4. She told me it was water damaged. She says she tried the bag of rice routine to dry it out and then tried rebooting it. She took it to an iPhone repair shop (not an Apple store). After a couple of days, they said they couldn’t get it to boot either. Her concern is that she does not have a current backup, and there are family photos that she wants to save....
Chosen Solution Hello, i was repairing my friend’s iphone but when i was about to assemble it and test it out,i accidentally charge the iphone without putting in the battery into the motherboard..the phone then shows apple logo then goes black. Is it the motherboard problem? But previously he said he did a downgrade to the phone and something went wrong, the phone will keep on reboot until a charger is plug in…...
Chosen Solution i have an iPhone 6 that is not picking up any signal. It recognizes when the SIM is inserted but just either says searching for awhile or goes straight to no service. I tried multiple SIMS and tried calling the carrier “611” but goes straight to call failed. I reset the network settings and took the phone apart and checked that the cellular charging port antenna was on good and I also replaced the back housing to a new one just in case it was the problem but it still didn’t help....
Chosen Solution Hi i just replaces my iphone screen and now it won’t turn on or off. It stays at the apple logo screen, sometimes with that loop circle. It won’t turn off, go into DFU mode or anything. All the cables seem to be in its place. What should i do? Thanks in advance You may need to lift the logic board off the battery to shut off the phone....
Chosen Solution Hello Guys, i need help. I have an iPhone SE 2020, replaced screen (by me) which is now kernel panicking and restarting every 180s (has nothing to do with the kernel panicking, screen replacement was done now a year ago). It has no obvious pry damage, the mosfet by the battery connector is still in place and not moveable. With both the OEM Battery and a new 3rd party one the kernel panic keeps happening as well as the 0% battery charge thing....
Chosen Solution I have an 8 plus that I just repaired the screen on, and due to me being stubborn, I kept trying to enter my pass code on the old broken screen, and now my 8 Plus is disabled and I need to connect to my itunes. Only problem with that is that when I connect to my PC the phone vibrates 3 times at first as soon as it’s plugged in and that is it....
Chosen Solution I’m looking at buying all the parts to build a MacBook Pro. Wondering if I could build one with actual parts. Sorry just not possible ;-{ Still cheaper to buy it directly from Apple. First the system is still on the new side finding all of the parts will be hard and they will cost a premium! Maybe in a few years you might be able to do this buying damaged systems piecing them together....
Chosen Solution Hi, Can I replace my Pixel 2XL display glass only instead of replacing the whole screen? If yes can I buy the display glass from IFIXIT? Even if you can buy the glass from anywhere it’s not doable because it uses an OLED panel, which is extremely fragile. It takes thousands of dollars in special tools and equipment to replace just the glass on an OLED panel.
Chosen Solution When I record Rear Cam videos the audio is full of noise and static, but audio for FCAM Videos, phone calls, voice memos, etc works fine. I want to fix this issue, but don’t know what part to buy. I think I need to buy the Audio Control/Power Button Cable (iPhone SE (1st Gen) Audio Control and Power Button Cable), but I want to confirm that the mic on this part is for the RCAM audio....
Chosen Solution ok so I had gotten my phone repaired a couple of months ago and so when I went to the dollar store to get a screen protector , I used it , at first I was using my protective case ,then I said well….I do have a screen protector on, so I used my case (that isn’t protective)..which one day I saw that the side of my phone wasn’t on correctly(my right side of my screen) so that’s when I said well my phone works so it will be ok so then , 2 months ago my p button on my phone wasn’t working so then I thought it was just my phone protector that wasn’t on right was the problem , so 3 days ago I was getting food , I handed my phone to my baby sister, she dropped it , which it didn’t drop front wards it dropped backwards so then I hopped in the car and the bottom part of my screen wasn’t working so then I tried to put my passcode in ,it worked and my pass code starts with an 0 ,,… so it wouldn’t let me type it in, so Monday night I though well if I shut It off then turn it back on in the morning it might work so then I turned it on Tuesday morning and it required my code so I couldn’t use finger print then I panicked, tried to hit buttons and then it said wait one minute, then 5 minutes, so the I did 15, and then 1 hour then at school I tired again so now it says “disabled” and I don’t want to reset my phone soooo pleaseeeeee helppppppp meeeee asap before the holidays...
Chosen Solution I have my JBL Charge 3 since Christmas 2018, so not that long. Everything was normal, but since today It turns itself off around 10 seconds after connecting. Battery is charged up, even since charging it won’t stay on. replace the battery your battery health on that thing is too low to work
Chosen Solution why is my washer displaying F25 error code? @thefluffyfist & c.rodrigue great answer. Yes, it is a communication error. Start by trying to reset your washer by unplugging it and leave it unplugged for a bit (5-15min is usually sufficient). After that plug it is and see what you get. You will need to let us know the exact model of your washer so we can be specific your your washer....
Chosen Solution My Kenmore Elite side by side ice maker worked perfect until we left for about 4 months. Since then the ice maker tray will stop in a tilt which drips water to the already made ice. It makes ice fine but I can’t use the door dispenser since it’s a big frozen mess. If you’ve experienced, any help is appreciated. Thanks. Hi, I’m not familiar with then model and can’t find a service manual but have found this in a manual for a refrigerator with a very close model number to yours, that may help....
