Chosen Solution Samsung ultrabook 940x3g screen is cracked is it possible to change screen if yes how I Can’t find any guide @freedom777 check these guides as well as this video, although not great, to get this fixed.
Chosen Solution TL;DR: Did something nice for a family member who needed to use it for photos. Supposed to be short term, made it a 9 year loan by beating me into submission and then breaks the USB port. Not going on beyond that here, but I’m never doing anything nice for him again. OR letting him use anything I own. So this happened yesterday when I was called in on my day off, so who knows when this happened - could have happened on a work day and he didn’t tell me until the port was completely dead end but that’s not important - what’s important is it’s broken....
Chosen Solution The power button turns on fan works but the screen is staying black Hi, Is the HDD drive light (green light) on the front edge of the laptop turning on? Can you hear the Windows welcome theme music, indicating that the laptop has booted into Windows successfully? If not then perhaps the laptop has not fully turned on or has not booted into the OS. Try the following just in case it is a corrupted BIOS that is causing the problem....
Chosen Solution hi guys, first of all im sorry for my bad english .. 3 days ago i get the high sierra update, so i updated my macbook, before its done the macbook restarted itself then i get the kernel panic screen, i tryed to go to mac os utilities screen but then when i tried to reinstall it, it keeps asking me for the PIN code and i dont remember it....
Chosen Solution The keyboard and touchpad stopped working. The power button is still working. I did not spill water on it. There were cooling to -10 degrees Celsius(14 degrees Fahrenheit). What, theoretically, could break down? Try a new trackpad flex cable. They fail commonly. If not, then you have a board issue.
Chosen Solution I changed the spark plug and it’s running worse than before Here’s how to change it and gap it correctly: https://www.youtube.com/watch?v=Zf5eEE0y… Take the plug out wire brush it and check the gap between the arm going over the ceramic white cone if its bent in to where theres no gap adjust back out to where there is put it on the metal frame where its still plugged into the wire but not screwed into the cylinder and turn it over if you see a spark in between the metal arm and the ceramic cone....
Chosen Solution i replace the battery but i forgot where the screws suppose to be ? because they are different sizes and i dont know each size , if there is adiagram shows the screws chart because some of them small,medium ,big koky, yes there is. Check this guide. Step 5 even gives you the proper dimensions.
Chosen Solution My DEQ-7600 was working in my old truck and now isn’t working in my new truck. The button sounds work but no sound comes out of the speakers. Would you be able to fix my unit. James Sr. iFixit does not do repairs. All we are doing here is provide you with answers and guidance so you can try and fix it yourself. Since your Pioneer worked in your old truck but does not work in your new truck, I suggest that you check the wiring to and from your stereo....
Chosen Solution Hello, I recently moved my hard drive over from one Dell Inspiron 17-3721 to another. The first had motherboard failure but this one now has an issue with the DC power jack. Does anyone know of a good repair guide and a good place to get the part? Hi @mannermauler , Here’s a link to the service manual for your laptop, taken from this webpage Scroll to p.73 to view the necessary pre-requisite steps and then the procedure to remove the power adapter port....
Chosen Solution ‘‘‘I have a MacBook Pro (Retina, 13-inch, Early 2015) A1502. When replacing the battery I accidentally pulled out the cable shown in the picture. There was a long thin wire connected somewhere too. The long this wire is also shown in the picture. It seems like there is some white corrosion on the left side pins too. The keyboard and mouse no longer work. I’m able to use the computer with a wireless USB keyboard and mouse....
Chosen Solution So i saw that my screen was very dirty so i took a water spray and a cloth and just went around the screen, i made sure not to let any go inside from the bottom and what not but when i turned it off and came back to it 2 minutes later there is a small cloud of water in the bottom center of the screen just sitting there, i unplugged it and left it there now....
Chosen Solution Hopefully you can view the video I took. I’ve opened up the back and checked the green and yellow(ish) board. Both look good. I’ve unplugged power for hours. Nothing is working. i don’t know if u have got tv working yet but I would say it is a back light problem because there three strap that plug in to the power board an if one of the led blow on the first strap or it could be the last one the tv will try an turn on but can’t of the light is out it will just turn straight off an go into a blink code but if it like the middle one the light will still do the same thing but it will turn on an u can get a light an shine it into the screen u will see a picture....
Chosen Solution I woke up from taking a nap and my phone screen is green, when it first happened everything was kind of blurry and green. After two hours and many restarts and power-offs, it is no longer blurry and just has the green tint. Everything still works as I’m using it right now to ask this question, what should I do? Hi, Just verifying that it is a green hue and not an amber colour?...
Chosen Solution imac 21.5 mid 2011 Good morning , my iMac (mid 2011) all’improvvisto stopped working .. I feel that if I try to turn it on a trial basis but will not start (as if tentase several times the start) .. I disassembled the display, if I try to turn it on I 1 lED lit lED 2 is flashing and lED 3 off I have a mid 2010 27’ iMac that I use a lot, and last week my HD5750 GPU died : black screen, everything else working normally (I can access my iMac through shared screen with my MacBook Pro)....
Chosen Solution Original Jambox has a small board that includes the on/off, the mini jack sound output, and the micro-usb charging port. My board has been destroyed (I inadvertently overheated with a soldering iron, trying to reattach the charging port.) I need either a non-working Jambox that has an intact board, or the board itself. Any help out there? Your best option is to pick up a faulty one from somewhere like eBay and gut the board....
Chosen Solution Hi. One day i come home and the colors on my 70 inch tv is inverted. Ive tried to connect a pc to it and invert the colors though that but it seems there are more stuff wrong. I wouldn’t mind trying to fix it myself, i just have no place to start. Thanks for reading -Noah Edit: Thanks for the replies It is not a settings thing. I have been though them a couple of times and reset to factory twice....
Chosen Solution As we all know the power button doesn’t work without transferring the ic chip by the home button after replacing the screen. In iOS 10 there was an option in the display settings to disable the screen turning off when the cover was closed and that would solve the lock button issue while you tested the new screen etc. Where is that option in iOS 11, I can’t find it anywhere....
Chosen Solution iPad turns on and off constantly with the new battery. It does not turn on at all when not plugged in. When it is plugged in, the Apple logo appears for a few seconds then disappears, again and again. The iPad works fine when I plug the old battery back in. Hi Max, There may be a lot of reasons for it, but chances are good your new battery is defective....
Chosen Solution I got iPhone 4S, it was water damaged, I took it apart and cleaned it with Isopropyl, took apart the motherboard and cleaned it, and all connectors. I replace dock connector and battery. Now when I turn on the phone, it works but the motherboard gets really really hot, until I HAVE to shut it down. Battery stays cool. When I plug charger, it shows the little symbol of “charging” although the battery level keep going down and not up....
Chosen Solution Hey guys! I have a white iPhone 5 16GB on iOS 7, and it’s power button was broken. I replaced the flex and now everything is is perfect, except for the fact that the phone believes that is has headphones plugged in, so it wouldn’t play any sound trough the normal speakers. I could verify that the speakers do work by putting the phone to speaker mode during a phone call....
